Paper incorrectly fed, Paper incorrectly fed 3-9 – Visara 5350 User Manual
Page 75
Nov 06
35PPM Laser Printer User Guide
3-9
Paper Incorrectly Fed
Paper Incorrectly Fed
Status
Items to check
Action
Paper cannot be fed.
Paper jams occur.
Multiple sheets of paper are fed.
Paper is fed at an angle.
Is the paper correctly set?
Load the paper correctly. For
transparencies, postcards or
envelopes, fan them well first to
allow air to enter between each
sheet before loading.
See “Loading Paper“ on page 2-11.
Is the paper damp?
Replace with paper from a new
ream.
See “Loading Paper“ on page 2-11.
Is the correct type of paper used?
Load the correct type of paper.
See “About Paper“ on page 2-4.
Is the paper tray pushed in?
Push the paper tray completely into
the printer.
Is the paper jammed?
Remove the jammed paper.
See “Clearing Paper Jams“ on page
4-2.
Is the printer placed on a flat
location?
Place the printer on a stable
surface.
See “Installation Environment“on
page 1-2.
Are the paper tray guides set in the
correct positions?
Set the length guide and width
guide in the correct positions.
See “Loading Paper“ on page 2-11.
Did you print any picture postcards?
Clean the feed roll.