Visara 5350 - Manual (Page 22)

Nov 06
1-8 35PPM Laser Printer User Guide
Installation Procedure
Installation Procedure
This section describes how to install the printer.
Removing the Tape
When the printer is first taken out of the packaging box, the covers of the printer are taped as
shown in the diagram. Remove the tapes.
Installing the Optional Accessories
If you have purchased any optional accessories, install them before installing the Toner Cartridge
and before loading paper. If there are no optional accessories to install, proceed to the next section,
Installing the Toner Cartridge .
Tray module (A4/550 sheets)
See “Installing the Tray Module” on page 6-4 for details.
Duplex module
See “Installing the Duplex Module” on page 6-14 for details.
Offset catch tray
See “Installing the Offset Catch Tray” on page 6-18 for details.
Rear tray
See “Installing the Rear Tray” on page 6-24 for details.
Installing the Toner Cartridge
When installing the Toner Cartridge, take note of the following points:
■
Do not subject it to direct sunlight or strong light.
■
When installing the TONER cartridge, select a location not subject to strong light and try to
finish the installation within 5 minutes.
WARNING! Never throw an Toner Cartridge into an open flame. It can cause an explosion and
you can get burned.