Unsuitable locations, When using an ultrasonic humidifier, Safety precautions – Visara 5350 User Manual

Page 17: Handling the printer, Safety precautions 1-3, Handling the printer 1-3

Advertising
background image

Nov 06

35PPM Laser Printer User Guide

1-3

Safety Precautions

Unsuitable locations

Locations with direct exposure to sunlight

Locations close to cooling/heating appliances

Locations with direct exposure to drafts

Locations susceptible to vibrations

Dusty and dirty locations

Locations close to open flame

Damp locations

Locations exposed to magnetic forces

Locations susceptible to sudden changes in temperature or humidity

When using an ultrasonic humidifier

If tap water or well water is used in the ultrasonic humidifier, the impurities in the water will be
released to the atmosphere and adhere to the internal parts of the printer, and this may cause dete-
rioration in the print quality. Use only water that does not contain any impurities in the ultrasonic
humidifier.

Safety Precautions

This printer is available in either of the following power specifications: 110V and 220V. The speci-
fications that apply to your printer depend on your machine configuration. To prevent fire or shock
hazards, connect the power plug only to a properly rated power outlet.

Handling the Printer

Follow the guidelines below when lifting or moving the printer:

The printer is very heavy, and should always be lifted by two people. The weight of the

printer without paper tray, toner cartridge, and paper is about 51 lbs (23 kg). Never attempt

to lift the printer alone.

To lift the printer, have two individuals facing each other from the front and the rear of the

printer grasp the recessed areas on each side of the printer. Do not lift the printer by grasping

any area other than these recessed areas.

When lifting the printer, maintain proper lifting posture to prevent injuries.

Advertising