Visara 5350 - Manual (Page 166)

Nov 06
7-24 35PPM Laser Printer User Guide
FLASH Menu
FLASH Menu
The FLASH Menu provides access to the printer settings that are related to the FLASH DIMM.
The printer is supplied with varying levels of Flash Simm dependent on the region. It is not possi-
ble to update the amount of flash memory. The minimum configuration of flash memory supports
2 MB. To increase the capacity to store and use files on the printer a hard disk has to be added. Use
the following procedure to enter the FLASH Menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text FLASH Menu is shown on the second line of the dis-
play.
3. Press the SELECT button to enter the system menu.
4. Press the NEXT button to move through the submenus: Print, Delete, Format FLASH,
and FLASH summary.
5. Press the SELECT button to enter a submenu.
Use the procedures in the following table to access and change the Flash menu settings:
.
Submenus Procedure for Changing Setting
Print
This selection will read the selected file from
FLASH and print it as if it were being received
from one of the input ports. 1. Press NEXT or PREVIOUS to scroll through the files.
2. Press SELECT to choose and print the file.
Delete
This selection will delete the selected disk file or
directory from the FLASH DIMM. To delete an
entire directory, you must first delete all the files
within that directory. 1. Press NEXT or PREVIOUS to scroll through the files.
2. Press SELECT to choose and delete the file.
Format Flash
This selection will reformat the FLASH DIMM. 1. Press SELECT to reformat the FLASH DIMM.
Flash Summary
This selection will print a page containing
information about the installed FLASH DIMM
including a list of all the current existing files and
directories. 1. Press SELECT to print the FLASH summary.
WARNING! All files on the FLASH DIMM will be deleted if the Format FLASH function is
selected.