Westermo GD-01 - Manual (Page 103)

103 6196-2220
\N – Select data error correcting mode
Description:
If this feature is provided by the product, this command controls the preferred error
correcting mode for a data connection. It can only be used for transparent data transmis-
sion. If the MNP2 feature is provided, the product authorizes MNP error correction
mode.
Syntax:
AT\N<n>
Command example Possible responses Note
AT\N0 OK no error correction
AT\N? 0 Current value
OK
AT\N4 +CME ERROR: 3 LAPM error correction
selection, result:V42
feature is not provided
Defined values:
<n>
0: (default) Disables error correction mode
5: Selects MNP error correction mode
NOTE: +E prefixed commands of V.25 ter are not used.
B A C K