Westermo GD-01 - Manual (Page 125)

125 6196-2220
+WMUX – Data / Commands Multiplexing
Description:
This command allows to manage the data / AT commands multiplexing mode. See in the
end of the manual for the Data / Commands multiplexing protocol description.
Syntax:
AT+WMUX=<mode>
Command example Possible responses Note
AT+WMUX=? +WMUX: (0-1) Possible values
OK
AT+WMUX? +WMUX: 0 Data / Commands
multiplexing disabled.
OK
AT+WMUX=1 OK Enable Data / Commands
multiplexing
Defined values:
<mode>
0: Multiplexing disabled.When the product is online (data communication in
progress), no AT command can be used (default).
1: Multiplexing enabled. Data flows and AT commands are multiplexed while in
online mode (data communication in progress).
B A C K