Westermo GD-01 - Manual (Page 111)

111 6196-2220
+FBUF – Buffer size report
Description:
This command requests the size of the exchange buffer between the modem and the fax
application. Only the read command is supported.
Syntax:
AT+FBUF
Command example Possible responses Note
AT+FBUF? 1024 Current value
OK
+FCQ – Copy quality checking
Description:
This command controls Copy Quality checking for receiving faxes.
Syntax:
AT+FCQ=<n>
Command example Possible responses Note
AT+FCQ=? (0) Test command
OK
+FCR – Capability to receive
Description:
This commands controls the capability of the modem to accept incoming faxes.
Syntax:
AT+FCR=<n>
Command example Possible responses Note
AT+FCR=? (0,1) Test command
OK
Defined values:
<n>
0: The modem will not accept incoming faxes.
1: (default) The modem will accept incoming faxes.
B A C K