Westermo GD-01 - Manual (Page 75)

75 6196-2220
Supplementary Services commands
+CCFC – Call forwarding
Description:
This commands allows control of the "call forwarding" supplementary service.
Syntax:
AT+CCFC= <reason>, <mode> [, <number> [,<type> [,<class> [,<subaddr> [, <satype>
[,<time> ] ] ] ] ] ]
Response syntax:
+CCFC: <status>, <class1> [, <number>, <type> [,<subaddr>, <satype> [,<time> ] ] ] [
<CR><LF>+CCFC: <status>,
<class2> [, <number>, <type> [,<subaddr>, <satype> [,<time> ] ] ] [ ... ] ]
Command example Possible responses Note
AT+CCFC=0,3,”0146290800” OK Register to an
unconditional call
forwarding
AT+CCFC=0,2 +CCFC:1,1, Interrogate unconditional
”0146290800”,129 call forwarding.
Call forwarding active for
voice
<CR><LF>+CCFC:1,2, Call forwarding active for
”0146290802”,129 data
<CR><LF>+CCFC:1,4,
”0146290804”,129 Call forwarding active for
OK fax
AT+CCFC=0,4 OK Erase unconditional call
forwarding
NOTE: +CCFC responses are not sorted by <class> parameter, but only by the order
of network response.
Defined values:
<reason>
0: Unconditional
1: Mobile busy
2: No reply
3: Not reachable
4: All call forwarding
5: All conditional call forwarding
B A C K