Westermo GD-01 - Manual (Page 78)

78 6196-2220
+CPWD – Modify SS password
Description:
This command is used by the application to change the supplementary service password.
Syntax:
AT+CPWD=<fac>,<OldPassword>, <NewPassword>
for <fac> see +CLCK command with only “P2” facility added (SIM PIN2).
Command example Possible responses Note
AT+CPWD=”AO”,1234,5555 OK Change Call Barring
password, result:
Password changed
AT+CPWD=”AO”,1234,5555 +CME ERROR: 16 Change password, result:
Wrong password
AT+CPWD=”AO”,5555,1234 OK Change password, result:
Password changed
Whatever the facility, the change of password applies to all call barring.
+CCWA – Call waiting
Description:
This command allows control of the call waiting supplementary service.The product will
send a +CCWA unsolicited result code when the call waiting service is enabled.
Syntax:
AT+CCWA=<n>, [ <mode> [, <class> ] ]
Response Syntax: (for <mode>=2 and command successful)
+CCWA: <status> [, <class1> [ <CR><LF>+CCWA: <status>, <class2>[ ... ] ]
Unsolicited result:
+CCWA: <number>, <type>, <class> [ ,<alpha>] (when waiting service is enabled)
B A C K