Westermo GD-01 - Manual (Page 198)

198 6196-2220
CHANNEL 3
PWR RD TD
DCD2 DCD3 DCD4
CHANNEL 2 POWER 12-36V DC 1 2 3 4 5 - + R+ R- T+ T-
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 R+ R- T+ T- T+ T- R+ R-
GD-01
PLC
GD-xx manually sending text message with SMS to GD-xx
GSM in the sending end
AT+CPIN=______ Insert PIN number if required
AT&F To set the unit to factory default settings
AT+CMGS=”070428020”<CR> Sending text message to given number
I am fine thanks<ctrl Z>
+CMGS: <mr>
Response from GD-xx where <mr> shows number of
outgoing messages (which are not stored)
OK Successful transmission.
GSM in the receiving end
+CMTI: ”SM”,n Message from GD-xx to terminal. Message have been
Received and can be read at location n.
AT+CMGR=n To read the message stored at location n.
+CMGR: “REC UNREAD”, Message from GD-xx.
“+46708888888”,,”02/04/15,
08:38:35-04”
I am fine thanks
Message from sender.
Note: The incoming SMS message can be also be transmitted directly to the terminal
as soon as the modem receives the message. Please refer to the AT-command
section of this manual.
B A C K