Westermo GD-01 - Manual (Page 171)

171 6196-2220
assigned during the last PDP context activation that used the context definition referred
to by <cid>. <PDP_address> is omitted if none is available.
Command example Possible responses
AT+CGPADDR=1 +CGPADDR=1,"107.210.5.4"
OK
AT+CGPADDR=? +CGAPDDR= (1-32)
OK
AT+CGPADDR +CGPADDR: 1,
+CGPADDR: 2,"10.3.73.151"
+CGPADDR: 3,
+CGPADDR: 4,
+CGCOUNTERS – PDP Counters Infos, (GPRS command)
Description
This command enable or disable the spontaneous sending of the last PDP deactivated
counters.Theses counters are related to connection time of a PDP context or data
volumes sent and received during a PDP context life (ie between is activation and
deactivation). NOT IMPLEMENTED IN CURRENT VERSION
Syntax
AT+CGCOUNTERS
AT+CGCOUNTERS=?
AT+CGCOUNTERS?
Response on ”AT+CGCOUNTERS=?”:
+CGCOUNTERS: (0-1)
Response on “AT+CGCOUNTERS?”
+CGCOUNTERS: <cid>, <PDP Context Time>, <Data IN>, <Data OUT>
(The last PDP counters infos in memory)
Command example Possible responses Note
AT+CGCOUNTERS=0 OK PDP Counters infos
disabled
AT+CGCOUNTERS=1 OK PDP Counters Infos
enabled
AT+CGCOUNTERS? +CGCOUNTERS:
<1>, <55>, <1520 >,
<122>
B A C K