Westermo GD-01 - Manual (Page 53)

53 6196-2220
Short Messages commands
Parameters definition
The parameters below are used in the short message commands.
<da> Destination Address, coded like GSM 03.40 TP-DA
<dcs> Data Coding Scheme, coded like in document [5].
<dt> Discharge Time in string format: “yy/MM/dd,hh:mm:ss±zz”
(Year [00-99], Month [01-12], Day [01-31], Hour, Minute,
Second and Time Zone [quarters of an hour] )
<fo> First Octet, coded like SMS-SUBMIT first octet in
GSM 03.40, default value is 17 for SMS-SUBMIT
<index> Place of storage in memory.
<length> Text mode (+CMGF=1): number of characters PDU mode
(+CMGF=0): length of the TP data unit in octets
<mem1> Memory used to list, read and delete messages
(+CMGL, +CMGR and +CMGD).
<mem2> Memory used to write and send messages
(+CMGW, +CMSS).
<mid> CBM Message Identifier.
<mr> Message Reference.
<oa> Originator Address.
<pid> Protocol Identifier.
<pdu> For SMS: GSM 04.11 SC address followed by GSM 03.40
TPDU in hexadecimal format, coded as specified in GSM
03.40 for CBS: GSM 03.41 TPDU in hexadecimal format
<ra> Recipient Address.
<sca> Service Center Address
<scts> Service Center Time Stamp in string format:
“yy/MM/dd,hh:mm:ss±zz”
(Year/Month/Day,Hour:Min:Seconds±TimeZone)
<sn> CBM Serial Number
<st> Status of a SMS-STATUS-REPORT
<stat> Status of message in memory.
<tooa> Type-of-Address of <oa>.
<tora> Type-of-Address of <ra>.
<tosca> Type-of-Address of <sca>.
<total1> Number of message locations in <mem1>.
<total2> Number of messages locations in <mem2.
<used1> Total number of messages locations in <mem1>.
<used2> Total number of messages locations in <mem2.
<vp> Validity Period of the short message, default value is 167
B A C K