Westermo GD-01 - Manual (Page 99)

99 6196-2220
+DOPT – Others radio link parameters
Description:
This command allows some supplementary radio link protocol parameters to be
changed.
Syntax:
AT+DOPT=<reset_allowed>,<dtx_allowed>
Command example Possible responses Note
AT+DOPT=1 OK Set new parameters
AT+DOPT=? (0,1),(0,1) Test command, result:
DTX is supported
OK
AT+DOPT=1,1 OK Set new parameters
AT+DOPT? 1,1 Current values
OK
Defined values:
<reset_allowed>
0: Data communication is hung up in case of bad radio link.
1: (default) Data communication continues in case of bad radio link (possi-
ble loss of data)
< dtx_allowed >
0: Normal mode
1: (default) Economic battery mode
(not supported by all networks).
B A C K