Westermo GD-01 - Manual (Page 132)

132 6196-2220
+WDWL – Downloading
Description:
This command switches the product to download mode. Downloading is performed
using the 1K-XMODEM protocol.
Syntax:
AT+WDWL
Command example Possible responses Note
AT+WDWL +WDWL: 0 Switch on downloading
mode, start the down-
loading
...Downloading in
progress
AT+CFUN=1 OK Reset the product
at the end
+WDR – Data Rate
Description:
This command allows the data rate for bearer data to be configured
(available for outgoing calls only).
Syntax:
AT+WDR=<n>
Command example Possible responses Note
AT+WDR=<n>
AT+WDR=? +WDR: (0-2) Possible values, Half Rate
available.
AT+WDR? +WDR: <n> Request current value
AT+WDR=1 OK Configure voice type
FR,HR with HR prefered.
Bearer is configured
AT+WDR=3 +CME ERROR: 3 Syntax error
AT+WDR? +WDR: 1 Ask the current value
OK
Defined values:
<n>
Data coding type.
0: FR
1: FR, HR with HR preferred
2: HR, FR with FR preferred.
B A C K