Westermo GD-01 - Manual (Page 106)

106 6196-2220
+FRH – HDLC receive speed
Description:
This command sets the fax receive speed, using the HDLC protocol.
Syntax:
AT+FRH=<speed>
Command example Possible responses Note
AT+FRH=? (3) Test command
OK
Defined values:
<speed>
can only take the value 3, which corresponds to V.21 channels 300 bps.
+FTS – Stop transmission and wait
Description:
This command stops transmission for the period specified.
Syntax:
AT+FTS=<n>
Command example Possible responses Note
AT+FTS=? (0-255) Test command
OK
AT+FTS=50 OK Stops transmission and
waits for 0.5s
Defined values:
<n>
Silence period (units of 10 ms).
B A C K