Westermo GD-01 User Manual
Page 15

15
6196-2220
+CPAS – Phone activity status
Description:
This command returns the activity status of the mobile equipment.
Syntax:
AT+CPAS
Command example
Possible responses
Note
AT+CPAS
+CPAS: <pas>
Current activity status OK
Defined values:
<pas> may be one of the following parameters
0
ready (allow commands from TA/TE)
1
unavailable (does not allow commands)
2
unknown
3
ringing (ringer is active)
4
call in progress
5 asleep
(low
functionality)
+CMEE – Report Mobile Equipment Errors
Description:
This command disables or enables the use of the “+CME ERROR: <xxx>” or “+CMS
ERROR:<xxx>” result code instead of simply “ERROR”.
See chapter ”error codes” for ”+CME ERROR” result codes description and ”+CMS
ERROR” result codes.
Syntax:
AT+CMEE=<error reporting flag>
<error reporting flag> may be one of the following parameters
0
Disable ME error reports, use only ”ERROR”
1
Enable long error reports, ”+CME ERROR xxx”
or ”+CMS ERROR xxx”
Command example
Possible responses
Note
AT+CMEE=0 OK
Disable
ME
error
reports,
use only «
ERROR »
AT+CMEE=1 OK
Enable
”+CME ERROR: <xxx>”
or
”+CMS ERROR: <xxx>”
B A C K