Westermo GD-01 - Manual (Page 105)

105 6196-2220
+FRM – Receive speed
Description:
This command sets the fax receive speed.
Syntax:
AT+FRM=<speed>
Command example Possible responses Note
AT+FRM=? (24,48,72,73,74,96,97,98,
121,122,145,146) Test command Note:
OK Fax 14.4 kbps
supported
Defined values:
The speed values are identical to those of the +FTM command (see above).
+FTH – HDLC transmit speed
Description:
This command sets the fax transmit speed, using the HDLC protocol.
Syntax:
AT+FTH=<speed>
Command example Possible responses Note
AT+FTH=? (3) Test command
OK
Defined values:
<speed>
Can only take the value 3, which corresponds to V.21 channels 300 bps.
B A C K