Westermo GD-01 - Manual (Page 130)

130 6196-2220
<status>
0: Not Reloaded from SIM (no change since last init or SIM remove)
1: Reloaded from SIM to internal memory (at least one entry has changed)
Or for event 11:
+WIND: <event>,[“<checksum of SM>”],[“<checksum of FD>”],[“<checksum of
ON>”],[“<checksum of SN>”] ,[“<checksum of EN>”],[“<checksum of LD>”]
<checksum>
128-bit “fingerprint” of the phonebook.
NOTE: If the service of the phonebook is not loaded or not present, the checksum is
not displayed and two commas without checksum are displayed (,,).
+WLPR – Read Language Preference
Description:
Read a Language Preference value of EF-LP.The first indices should have the highest
priority.
Syntax:
AT+WLPR= <index >
Response syntax:
+WLPR: <value>
Command example Possible responses Note
AT+WLPR? +WLPR: 4 Read command, result:
OK four language
preferences are available
in EF-LP
AT+WLPR=1 +WLPR: 5 Read first EF-LP index
OK value, result: language
preference is 5
B A C K