Westermo GD-01 - Manual (Page 71)

71 6196-2220
Defined values:
<index>
1-20:When the preferred message storage is “BM”. Integer type values in the range of
location numbers of SIM Message memory when the preferred message storage is
“SM” or “SR”.
<DelFlag>
0: Delete message at location <index>.
1: Delete All READ messages
2: Delete All READ and SENT messages
3: Delete All READ, SENT and UNSENT messages
4: Delete All messages.
NOTE: when the preferred message storage is “SR”, as SMS status reports are assumed
to have a “READ” status, if <DelFlag> is greater than 0, all SMS status reports
will be deleted.
+CSCA – Service center address
Description:
This command is used to indicate which service center the message must be sent to.The
product has no default value for this address. If the application tries to send a
message without having indicated the service center address, an error will be generated.
Therefore, the application must indicate the SC address when initialising the SMS.
This address is then permanently valid.The application may change it if necessary.
Syntax:
AT+CSCA
Command example Possible responses Note
AT+CMGS= +CMS ERROR: 330 Send a message, result:
“+33146290800”<CR> service center
Hello, how are you?<ctrl-Z> unknown
AT+CSCA=”0696741234” OK Service center
initialization
AT+CMGS= +CMGS: 1 Successful transmission.
”+33146290800”<CR>
Happy Birthday ! <ctrl-Z> OK
B A C K