Westermo GD-01 - Manual (Page 32)

32 6196-2220
+CPOL – Preferred operator list
Description:
This command is used to edit the SIM preferred list of networks.
Syntax:
AT+CPOL= [ <index> ][ , <format> [ , <oper> ] ]
The different possibilities are:
• AT+CPOL = <index> to delete an entry.
• AT+CPOL = , <format> to set the format used by the read command (AT+CPOL?).
• AT+CPOL = , <format>, <oper> to put <oper> in the next free location.
• AT+CPOL = <index> , <format> , <oper> to write <oper> in the <format> at the
<index>.
The supported format are the same as for the +COPS command.
The length of this list is limited to 8 entries.
B A C K