Westermo GD-01 - Manual (Page 120)

120 6196-2220
V – DCE response format
Description:
This command determines the DCE response format, with or without header characters
<CR><LF>, and with the use of numeric result codes.
V0 V1
Information responses <text><CR><LF> <CR><LF>
<text><CR><LF>
Result codes <numeric code><CR> <CR><LF>
<verbose code><CR><LF>
Syntax:
ATV
Command example Possible responses Note
ATV0 0 DCE transmits limited
headers and trailers
and numeric result codes
ATV1 OK DCE transmits full
headers and trailers and
verbose response text
Z – Default configuration
Description:
This command restores the configuration profile. Any call is released.
Syntax:
ATZ
Command example Possible responses Note
ATZ OK –
B A C K