Westermo GD-01 - Manual (Page 148)

148 6196-2220
AT commands for GPRS
+CGDCONT – Define PDP Context, (GPRS command)
Description
This command specifies PDP context parameter values for a PDP context identified by
the local context identification parameter, <cid>. Eleven PDP contexts can be defined
through software. A special form of the set command, +CGDCONT= <cid> causes the
values for context number <cid> to become undefined.The test command returns values
supported as a compound value. If the MT supports several PDP types, <PDP_type>, the
parameter value ranges for each <PDP_type> are returned on a separate line.The read
command returns the current settings for each defined context.The test command
returns values supported as a compound value. If the MT supports several PDP types,
<PDP_type), the parameter value ranges for each <PDP_type> are returned on a sepa-
rate line.
Syntax:
+CGDCONT=[<cid> [,<PDP_type> [,<APN> [,<PDP_addr> [,<d_comp>
[,<h_comp>]]]]]]
+CGDCONT?
+CGDCONT=?
Response Syntax:
OK
ERROR
Response on “+CGDCONT?”:
+CGDCONT: <cid>, <PDP_type>, <APN>,<PDP_addr>, <data_comp>, <head_comp>
[<CR><LF>+CGDCONT: <cid>, <PDP_type>, <APN>,<PDP_addr>, <data_comp>,
<head_comp> [...]]
Response on “+CGDCONT=?”:
+CGDCONT: (range of supported <cid>s), <PDP_type>,,,(list of supported
<d_comp>s), (list of supported <h_comp>s)
[<CR><LF>+CGDCONT: (range of supported <cid>s), <PDP_type>,,,(list of supported
<d_comp>s),(list of supported <h_comp>s) [...]]
Defined values:
<cid>:
(PDP Context Identifier) a numeric parameter (1-32) which specifies a particular PDP
context definition.The parameter is local to the TE-MT interface and is used in other
PDP context-related commands.
B A C K