Westermo GD-01 - Manual (Page 135)

135 6196-2220
+WSCAN – Scan
Description:
This command displays the received signal strength indication (<rssi>) for a specified fre-
quency (in absolute format).This command is not allowed during communication.
Syntax:
AT+WSCAN=<absolute frequency>
Response syntax:
+WSCAN: <rssi>
Command example Possible responses Note
AT+WSCAN=50 +WSCAN: 23 Request <rssi> of
OK absolute frequency 50,
result: <rssi> is 23.
AT+WSCAN=1025 CME ERROR: 3 Request power of
absolute frequency 1025,
result: 1025 is not a valid
absolute frequency
Defined values:
<absolute frequency>
frequency in absolute format
<rssi>
0: -113 dBm or less
1: -111 dBm
2–30: -109 to -53 dBm
31: -51dBm or greater
99: not known or not detectable
B A C K