Westermo GD-01 User Manual
Page 62
62
6196-2220
<bfr>
Default is 0.
Possible values:
0:
TA buffer of unsolicited result codes defined within this command is flushed to
the TE when <mode> 1...3 is entered (OK response shall be given before
flushing the codes)
1:
TA buffer of unsolicited result codes defined within this command is cleared
when <mode> 1...3 is entered.
+CMGR – Read message
Description:
This command allows the application to read stored messages.The messages are read
from the memory selected by +CPMS command.
Syntax:
AT+CMGR=<index>
Response syntax for text mode:
+CMGR:<stat>,<oa>,[<alpha>,] <scts> [,<tooa>,<fo>, <pid>,<dcs>,<sca>,
<tosca>,<length>]
<CR><LF> <data> (for SMS-DELIVER only)
+CMGR: <stat>,<da>,[<alpha>,] [,<toda>,<fo>,<pid>,<dcs>, [<vp>], <sca>,
<tosca>,<length>]<CR><LF> <data> (for SMS-SUBMIT only)
+CMGR: <stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
(for SMS-STATUS-REPORT only)
Response syntax for PDU mode:
+CMGR: <stat>, [<alpha>] ,<length> <CR><LF> <pdu>
A message read with status “REC UNREAD” will be updated in memory with the status
“REC READ”.
NOTE: the <stat> parameter for SMS Status Reports is always “READ”.
B A C K