Westermo GD-01 - Manual (Page 142)

142 6196-2220
+CPHS – CPHS command
Description:
This command is used to activate, deactivate or interrogate a CPHS feature (e.g.Voice
Mail Indicator, Mail Box Number...)
NOTE: This command may answer +CME ERROR: 3 if the CPHS feature is disabled
or if the SIM card does not support this CPHS feature.
Syntax
AT+CPHS=<Mode>,<FctId>
Command example Possible responses Note
AT+CPHS=<Mode>,<FctId> OK
+CME ERROR: 3
+CPHS: <FctId1>,<Status>
<CR<LF>
+CPHS: <FctId2>,<Status>
<CR<LF>
AT+CPHS? ...
+CPHS: <FctIdn>,<Status>
<CR<LF>
OK
AT+CPHS=? OK
Defined values:
<Mode>
0: Deactivate a CPHS feature
1: Activate a CPHS feature
2: Interrogate a CPHS status
<FctId>
1: Voice Mail Indicator
2: Mail Box Number
<Status>
0: CPHS feature disabled
1: CPHS feature enabled
B A C K