Westermo GD-01 - Manual (Page 50)

50 6196-2220
+WAIP – Avoid phonebook init
Description:
This specific command allows the initialization of all phonebooks to be inhibited during
subsequent boots.
Syntax:
AT+WAIP=<mode>
Command example Possible responses Note
AT+WAIP? +WAIP:0 Current values?
OK
AT+WAIP=? +WAIP: (0,1) Possible values?
OK
AT+WAIP =1 OK Inhibit initialization of
phonebooks (next boot)
AT&W Save modifications
in EEPROM
Caution: The given value should be stored in EEPROM.Therefore, the AT&W
command must be used to save the new <mode> value.
NOTE: No phonebook commands are allowed if +WAIP=1 (after boot).
If a phonebook command is entered, a “+CME ERROR: 3” is returned.
Defined values:
<mode>
0: Normal initialization (with phonebooks)
1: No phonebook initialization.52
B A C K