Westermo GD-01 - Manual (Page 25)

25 6196-2220
+CSNS – Single Numbering Scheme
Description:
This command selects the bearer to be used when an MT single numbering scheme call
is set up (see +CICB). NOTE: setting the +CSNS command affects the current value of
+CICB.
Syntax:
AT+CSNS
Command example Possible responses Note
AT+CSNS=2 OK force a fax call
AT+CSNS=0 OK force a voice call
AT+CSNS? +CSNS: 0 Interrogate value,
incoming bearer:
voice call
AT+CSNS=? +CSNS: (0,2,4) Test command,
voice, data or fax default
incoming bearer
Defined values:
<mode>
0: Voice
2: Fax
4: Data
B A C K