Westermo GD-01 - Manual (Page 114)

114 6196-2220
+FDCC – DCE capabilities parameters
Description:
This command allows the DTE to parameter the capabilities used for any session.
Syntax:
AT+FDCC=<vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>
Command example Possible responses Note
AT+ FDCC=? (0,1),(0-5),(0-2),(0-2),(0-3), Test command, Note:
(0),(0),(0-7) Fax ECM not
OK supported. Fax 14,4 kbps
supported
Defined values:
The parameters and default values are the same as for the +FDIS command
+FLID – Local ID string
Description:
This command allows the local ID string to be defined.
Syntax:
AT+FLID=”<string>”
The string has a limited size, and accepts any characters between 32 and 127.
Command example Possible responses Note
AT+FLID=? (20),(32-127) Test command
OK
+FPHCTO – Page transfer timeout parameter
Description:
This command sets the period the modem waits for another page before it assumes
there are no more pages and aborts.
Syntax:
AT+FPHCT0=<n> (default is 30)
Command example Possible responses Note
AT+FPHCTO=? (0-255) Test command
OK
B A C K