Westermo GD-01 - Manual (Page 45)

45 6196-2220
AT+CPBW=8,”01292349”, Write location, location
129,”80xyz” OK 8 is written.The string
has a wrong UCS2
format, it is therefore
considered as an ASCII
string
When the fixed dialling phonebook (FDN) is locked, this command is not allowed.
Moreover, when the FDN is unlocked, PIN2 is required to write in the FDN phonebook.
But if PIN2 authentication has been performed during the current session, the +CPBW
command with FDN is allowed.
Command example Possible responses Note
AT+CPBS=”FD” OK Choose FDN
AT+CPBW=5,”01290917”, Write in FDN at location
129,”Jacky” +CME ERROR: 17 5, SIM PIN2 is required
AT+CPIN? SIM PIN2 SIM PIN2 is required
AT+CPIN=5678 OK Enter SIM PIN2
AT+CPBW=5,”01290917”, Write in FDN at
129,”Jacky” OK location 5, writing in FDN
is now allowed
Defines values:
<index> integer type value depending on the capacity of the phonebook memory.
<number> phone number in ASCII format.
<type>
TON/NPI (Type of address octet in integer format).
NOTE: for the <type> parameter, all values are allowed from 0 to 255, but the MSB will
be set to 1 in all cases (example: a <type> value of 17 will be written as
145).
<text> string type.
NOTE 1: For the <text> parameter all strings starting with “80” , “81” or “81” are
considered in UCS2 format. See the APPENDIX E (Coding of Alpha fields
in the SIM for UCS2).
NOTE 2: The +CSCS (Select Character set) command does not affect the format
for phonebook entries.
B A C K