Westermo GD-01 - Manual (Page 81)

81 6196-2220
+CLIP – Calling line identification presentation
Description:
This command allows control of the calling line identification presentation supplementary
service.When presentation of the CLI (Calling Line Identification) is enabled (and calling
subscriber allows), +CLIP response is returned after every RING (or +CRING) result
code.
Syntax:
AT+CLIP=<n>
Response Syntax:
+CLIP: <n>,<m> for AT+CLIP?
+CLIP: <number>, <type>[ ,<subaddr>, <satype>, <alpha> ] for an incoming call, after
each RING or +CRING indication
Command example Possible responses Note
AT+CLIP=1 OK Enable CLIP Note
AT+CLIP? +CLIP:<n>,<m> Ask for current
OK functionality, <n>
and <m> defined as
below
RING Incoming call
+CLIP: “0146290800”,
129,1,,,”FRED” or
+CLIP:“0146290800”,129,1,,, Incoming call with
”8000204212FFFF” number and name
presentation
(UCS2 format)
AT+CLIP=0 OK Disable CLIP presentation
Defined values:
<n>
parameter sets/shows the result code presentation in the TA
0: Disable
1: Enable
<m>
Parameter shows the subscriber CLIP service status in the network
0: CLIP not provisioned
1: CLIP provisioned
2: Unknown (no network...)
B A C K