Yaskawa Sigma-5 Series User Manual:: For Use with Large-Capacity Models-Setup. Rotary Motors - Manual (Page 109)

5 Trial Operation (Checking Servomotor Operation)
5-12
2
(cont’d)
(5) Once SigmaWin+ is started, the connec-
tion window is displayed.
Note: is used for operation with
no SERVOPACK connected.
Click to search for the con-
nected SERVOPACK.
Connection Window
(6) Search Condition Setting window is open.
Select Σ-V( ), and click .
A dialog box will open first to tell you a
search has started, and then the search
result will be shown in the connection
window.
Note: If the message, “Servopack not
found” is displayed, refer to 2.2
Selecting a SERVOPACK of Sig-
maWin+ English Edition Online
Manual (YE_Applications -> Man-
ual).
Search Condition Setting Window
(7) Select the SERVOPACK to be connected.
Click . (Place the cursor over
the SERVOPACK to be connected, and
then click on it.)
The main window of SigmaWin+ will then
open.
(cont’d)
Step Operation Display
Select only Σ-V