Yaskawa Sigma-5 Series User Manual:: For Use with Large-Capacity Models-Setup. Rotary Motors - Manual (Page 112)

5.5 JOG Operation Using SigmaWin+
5-15
T
rial Operation (Checking Servomotor Operation)
Refer to the online manual for SigmaWin+ for details. Follow the steps below to view
the online manual.
<How to view the online manual>
1.
Turn ON the computer.
2.
Open the YE_Applications folder.
3.
Open the Manual folder.
4.
Open SigmaWin+ English Edition Online Manual.
6
• Start JOG operation.
When you click the servomotor
will rotate in the forward direction. When
you click it will rotate in reverse.
Confirm that the servomotor operation is cor-
rect. At the same time, carefully inspect the
servomotor’s condition and check the follow-
ing points in particular. If a problem is found,
correct it.
• Is there any unusual vibration?
• Is there any unusual sound?
• Is the temperature rising unusually high?
7
• Servo OFF
Click .
(Screen display will return to the display
shown at step 4.)
8
• Terminate JOG operation.
Click to end JOG operation.
You will return to the main window.
(cont’d)
Step Operation Display