Yaskawa Sigma-5 Series User Manual:: For Use with Large-Capacity Models-Setup. Rotary Motors - Manual (Page 14)

xiv
„ Maintenance and Inspection
„ Disposal
„ General Precautions
CAUTION
• Do not disassemble the SERVOPACK and the converter.
Failure to observe this caution may result in electric shock or injury.
• Do not attempt to change wiring while the power is ON.
Failure to observe this caution may result in electric shock or injury.
• When replacing the SERVOPACK, resume operation only after copying the
previous SERVOPACK parameters to the new SERVOPACK.
Failure to observe this caution may result in damage to the product.
• Be sure to eliminate static electricity before operating buttons and switches
inside the plastic cover.
Failure to observe this caution may result in damage to the product.
CAUTION
• When disposing of the products, treat them as ordinary industrial waste.
Observe the following general precautions
to ensure safe application.
• The products shown in illustrations in this manual are sometimes shown without
covers or protective guards. Always replace the cover or protective guard as
specified first, and then operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match
the product you received.
• If the manual must be ordered due to loss or damage, inform your nearest
Yaskawa representative or one of the offices listed on the back of this manual.