Converter – Yaskawa Sigma-5 Series User Manual:: For Use with Large-Capacity Models-Setup. Rotary Motors User Manual
Page 64
Advertising
3 Wiring and Connection
3.4.1 Names and Functions of Main Circuit Terminals
3-16
Converter
The following figure shows the appearance of the converter.
Note: For the purpose of this description, the converter is shown with the front cover removed.
Always keep the front cover attached when using the converter.
+, -
NC
Do not connect these terminals.
Ground terminal
Connect this terminal to the power supply ground termi-
nal and the Servomotor ground terminal, and then
ground it.
(cont’d)
Terminals
Name
Specifications
SGDV-COA2BAA or -COA3ZDA Converter
CN101
CN103, CN104
L1, L2, L3
B1, B2
P, N
1,
ޓ2
Advertising