GE Industrial Solutions Entellisys System User Manual - Manual (Page 123)

Viewing waveforms 123
9
Displayed on the left side of the window are parameter fields, as shown in Figure 9-4:
Figure 9-4 Parameter fields
• The blue field displays the parameter value at the blue Cursor 1 position.
• The green field displays the parameter value at the green Cursor 2 position.
• The yellow field indicates the relative parameter difference between the two cursor
amplitude values.
• The vertical red line indicates the trigger position (%) of the data capture.
• Located just above the Parameter fields on the right are three buttons. These three buttons
corresponds to the Cursor 1, Cursor 2 and the delta values being displayed. When turned off,
the corresponding values are not displayed in the numerical chart. All three switches are on
by default.