GE Industrial Solutions Entellisys System User Manual - Manual (Page 124)

Sequence of events, fault reports, and waveform capture records 124
9
9.6 Waveform viewer functions
Click the Config button to display the waveform viewer setup window, as shown in Figure 9-5.
Figure 9-5 Waveform viewer setup window
This window enables the selection of channels to be plotted in various colors, line styles, and
groups for simultaneous display. These channels can be a combination of Analog and Digital
channels.
Click the Digital tab, as shown in Figure 9-6. When a change of state is detected within the
record, a checkmark appears beside the corresponding operand in the Change Detected
column.