GE Industrial Solutions Entellisys System User Manual - Manual (Page 91)

Bus Differential Relay 91
7
7.1.1.4 Setting up Bus Differential alarms
To activate an alarm (alarm-only and/or trip) when the Bus Differential Relay of a zone
operates
1. On the Main Menu, click User Settings, and then select Alarms.
2. On the Alarms screen, click Alarms Setup as shown in Figure 7-4. (See Alarms and events
on page 187 for a detailed list of the different alarms supported by the Bus Differential
Relay.)
To help distinguish among the alarms of different bus differential zones when the alarms are
actually activated enter a comment in the Comment text box.
Figure 7-3 Bus differential user settings