GE Industrial Solutions Entellisys System User Manual - Manual (Page 125)

Waveform viewer functions 125
9
Figure 9-6 Digital Channel Setup tab
Display axis names
• Check box hides/displays the Y-axis parameter names.
Auto-detect / auto-display
• Check box automatically displays preset, digital channel outputs if a change of state
occurred during triggering.
Change background color
• Change the background color of the graphs. The default is light blue. Changing this option
effects the background of waveform capture display.
Move cursors in one of two ways: either by clicking and dragging them left and right across the
duration period of the signal, or by using the Cursor 1 and Cursor 2 scroll bars at the top of the
window. The red line is the trigger position, which cannot be moved across the captured
waveforms.
The numeric amount listed in the corresponding colored box to the left of the signal indicates
the magnitude of the signal at the point where the cursor is located. There are also Cursor 1,
Cursor 2, and Delta boxes at the top of the window, which indicate the exact point in time for
that cursor position.
To zoom in on a selected section of waveform(s), right-click and drag the outline box over the
desired area. Multiple zooms are possible. To zoom out, right-click without dragging.