GE Industrial Solutions Entellisys System User Manual - Manual (Page 173)

Adjusting preventive maintenance values 173
12
12.2 Adjusting preventive maintenance values
All the values above, except for accumulated service hours and percentage total load life (which
are purely calculated values) can be adjusted through the HMI. To adjust these values, on the
Main Menu, click User Settings, and then click Preventative Maintenance.
The Setup tab on the Preventative Maintenance screen shown in Figure 12-2 displays current
values and allows the user to change fields that are adjustable. When a component of the
Entellisys system is commissioned, replaced or moved, adjustments have to be made to all
these values. When replacing a CPU component it is important to manually record all PM values,
so they can be reentered at a later time.
Notification Thresholds are the values at which a Preventative Maintenance alarm report will be
generated, as discussed in the next section.
A description of the adjustable fields on the Preventative Maintenance screen is given in the
following sections.
Figure 12-2 Setup tab of Preventative Maintenance screen