3 usage – GE Industrial Solutions Entellisys System User Manual User Manual
Page 88
Advertising
Zones, buses, and topologies
88
6
6.0.3 Usage
The purpose of configuring the zones, buses, and topologies is to define the system properties
for the multi-point functions (BD, MSGF, and ZSI), which, as noted above, operate on zones. This
information is also used by the PT Throwover function (see
details). Once this setup is completed (typically by GE before shipping) no further action is
required unless the switchgear line-up changes (e.g., a new circuit breaker is added).
To view a summary of the zone configuration, on the Maintenance screen click the Zone
Configuration tab as show in Figure 6-2.
Figure 6-2 Zone Configuration summary
Advertising