Basic control, 1 controlling circuit breakers, 3 basic control – GE Industrial Solutions Entellisys System User Manual User Manual
Page 27: 3basic control
Advertising
Controlling circuit breakers
27
3
3
Basic control
Entellisys allows users to control EntelliGuard circuit breakers from the HMI. A circuit breaker
may be commanded to open, close or trip. To locate or confirm the circuit breaker shown on the
HMI screen matches the physical circuit breaker, the locator LED on each EntelliGuard
Messenger can be set to flash for 10 or 30 seconds.
3.1 Controlling circuit breakers
To control a circuit breaker, navigate to the Breaker Status screen and click Control as shown in
Figure 3-1. The Breaker Control screen appears. The Breaker Control screen resembles
Figure 3-2 when the circuit breaker is open. The Breaker Control screen resembles Figure 3-3
when the circuit breaker is closed.
Figure 3-1 Breaker Status screen
Advertising