GE Industrial Solutions Entellisys System User Manual - Manual (Page 97)

Multi-Source Ground-Fault Relay 97
7
7.2.1.3 Setup of Multi-Source Ground-Fault alarms
To activate an alarm (alarm-only and/or trip) when the Multi-Source Ground-Fault Relay of
a zone operates
1. On the Main Menu, click User Settings, and then select Alarms.
2. On the Alarms screen, click Alarms Setup as shown in Figure 7-7. (See Alarms and events
on page 187 for a detailed list of the different alarms supported by the Multi-Source
Ground-Fault Relay.)
To help distinguish among the alarms of different MSGF zones when the alarms are actually
activated enter a comment in the Comment text box.
Figure 7-7 Setting up Multi-Source GF alarms