GE Industrial Solutions Entellisys System User Manual - Manual (Page 153)

Introduction to FlexLogic 153
11
INPUTS/OUTPUTS:
Contact Inputs
(Note: total contact
inputs + total contact
outputs <= 128)
Contact Input 1 On
↓
Contact Input 128 On
Contact Input 1 Off
↓
Contact Input 128 Off
External contact input 1 activated
↓
External contact input 128 activated
External contact input 1 deactivated
↓
External contact input 128 deactivated
INPUTS/OUTPUTS:
Contact Outputs
(Note: total contact
inputs + total contact
outputs <= 128)
Contact Output 1 On
↓
Contact Output 128 On
Contact Output 1 Off
↓
Contact Output 128 Off
External contact output 1 activated
↓
External contact output 128 activated
External contact output 1 deactivated
↓
External contact output 128 deactivated
INPUTS/OUTPUTS:
Virtual Inputs Virtual Input 1 On
↓
Virtual Input 32 On
Flag is set, logic = 1
↓
Flag is set, logic = 1
INPUTS/OUTPUTS:
Virtual Outputs Virtual Output 1 On
↓
Virtual Output 128 On
Flag is set, logic = 1
↓
Flag is set, logic = 1
Breaker Control commands available as
virtual outputs:
Open Flux Shifter
Open Shunt Trip
Trip Flux Shifter
Trip Shunt Trip
Close
Network Interlock Lockout
Network Interlock Lockout Reset
Table 11-2 Entellisys FlexLogic operands
OPERAND TYPE OPERAND SYNTAX OPERAND DESCRIPTION