GE Industrial Solutions CPS6000 - Manual (Page 106)

CPS6000 –48V Indoor/Outdoor Power Shelf
Issue 21 January 2008
106
Modem Port Settings Enable or disable Write Access, the ability to change system
settings through the modem. The factory default setting is enabled.
Set the port Baud Rate to 2400, 4800, 9600 or 19200. The factory
default setting is 2400.
Set port Flow Control to none or SW (software). The factory
default setting is none.
Set the number of rings to be detected by the modem before it
answers (Rings to Answer). Can be set from 1 to 9. The factory
default setting is 1.