GE Industrial Solutions CPS6000 - Manual (Page 46)

CPS6000 –48V Indoor/Outdoor Power Shelf
Issue 21 January 2008
46
Inter-Shelf Connection
Refer to Figure 5-7 for the following procedure.
Step Action
1. Connect a shelf-interconnect cable from P5 (SYS AUX PORT) on the primary
shelf controller to the shelf SHF 2 connector on shelf 2.
2. Using shelf-interconnect cables, daisy-chain the remaining shelves as required,
connecting from the TO NEXT SHELF connector, to the next applicable shelf
connector as shown.
Figure 5-7: Inter-Shelf Connections