GE Industrial Solutions CPS6000 - Manual (Page 110)

CPS6000 –48V Indoor/Outdoor Power Shelf
Issue 21 January 2008
110
7. Battery Test Rectifier Voltage
8. System Date Format
9. System Date
10. System Time Format
11. System Time
12. Automatic Daylight Savings Feature
13. Display Contrast
14. Temperature Display Units
15. Alarm Test Feature
16. Alarm Test Relay Duration and Relay
The QS841A is programmed to associate the necessity of a PIN to the specific operation or
configurable parameter. A sample screen like that following is required for PIN access.
The up, down, left and right arrows are used to enter the appropriate password. Upon entering
a correct PIN the following momentary screen shows up and then disappears leaving the user
at the menu location prior to entering the PIN. The QS841A has a factory default of 0000 for
the PIN.
Once a user enters the PIN, total front panel access is allowed for:
• As long as the user remains in menus other than the default menu and/or
• The default display has remained on the front panel for more than user configurable
time-out value. The QS841A has a factory configured default of 30 minutes. This
time is adjustable between 1-120 minutes in 1 minute increments.
• An internal counter shall be kept and reset if the user leaves the default menu and
returns to others menus before the time-out period is reached.