GE Industrial Solutions CPS6000 - Manual (Page 6)

CPS6000 –48V Indoor/Outdoor Power Shelf
Issue 21 January 2008
6
1 Introduction
Overview
CPS6000 -48V Outdoor Power System is a modular power system designed for 19-inch
(483mm) and 23-inch (584mm) applications where reliability, space conservation and
environmental considerations are critical. This highly dense power system occupies minimum
space and its modular architecture enables an exact fit to custom needs.
The shelf architecture is based on the widely accepted and acclaimed CPS4000 systems. AC
power is brought in on the left side of the shelf. The first slot on the left side is occupied by
the controller. DC Output is aggregated on the right side of the shelf. Rectifiers/Ringers
occupy the slots available between the controller and the DC output
Figure 1-1: CPS6000 System with Distribution Module
The CPS6000 currently supports -48V primary loads up to 8.2kW of N+1 redundant power in
a single 19-inch shelf, and up to 10.9kW of N+1 redundant power in a 23-inch shelf with a
Bulk Output Module and 50A rectifiers.