GE Industrial Solutions CPS6000 - Manual (Page 167)

CPS6000 –48V Indoor/Outdoor Power Shelf
Issue 21 January 2008
167
cha cn1,dth=40
To initiate a manual boost charging, i.e., place the plant into boost charging mode, type in the
following command:
ope dc1,stt=“boost”
The tables below summarize the object-attribute pairs in the system along with the commands
that can be used with the pair and the valid range that the attribute may have. The values in
bold text are the default settings for the attributes.
Power System Related Commands
obj,attr description sta cha ope type range of values
ps1,des Power system description x text “QS840A”
ps1,sid Site ID x x text Up to 15 characters:””
ps1,swv Software version x text ACU software version
ps1,ltt Lamp test x number 1: do lamp test
ps1,usl Update serial link x number 1:perform update serial link
ps1,amt System ambient temperature x number dd°C
ps1,ptt Communication port type x x text “LOCAL”, “MODEM”
ps1,dls Daylight savings time enable x x number 0: disable, 1: enable
ps1,tim Time x x time hh:mm:ss (24-hour format)
ps1,dat Date x x date dd-mm-yy
Site ID: If desired, you may type in a maximum 15 alpha-numeric character set to
uniquely define a site location.
Update Serial Link: Running this command allows the system controller to retake
inventory of using equipment. Use this command to update acknowledged equipment
when, for example, a system is to run with one less rectifier.