GE Industrial Solutions CPS6000 - Manual (Page 202)

CPS6000 –48V Indoor/Outdoor Power Shelf
Issue 21 January 2008
202
Appendix D: EasyView for
Windows® for the
CPS6000 Controller
Overview
EasyView® for Windows OS (EasyView) is a program that runs on an IBM®-compatible PC
with an RS-232 port or laptop computer and provides access to a CPS6000 Controller.
(Hereafter the term PC is used to refer to a PC with an RS-232 port or laptop computer.) The
program provides access to controller alarms, system status, control and configuration. To use
EasyView you will have to load the EasyView application onto your PC, connect your PC to
the controller, and run the EasyView application.
Loading the EasyView Application
The EasyView software may be freely downloaded from the Lineage Power web site
http://www.lineagepower.com
Making the Connection
To use EasyView to access a CPS6000 controller you will need a PC, and a CPS6000
controller programming cable (comcode 848658100). Connect the cable to the serial port of
your PC and to the controller programming connector of the CPS6000.
Windows is a registered trademark of Microsoft Corporation
IBM is a registered trademark of IBM Corporation