Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 133
Brocade Mobility RFS7000-GR Controller System Reference Guide
119
53-1001944-01
Viewing and configuring switch WLANs
4
5. Select the RADIUS Conig... button. The RADIUS Configuration screen displays for defining an
external RADIUS or NAC Server.
The RADIUS Configuration screen contains tabs for defining both the RADIUS and NAC
server settings. For NAC overview and configuration information, see
6. Refer to the Server field and define the following credentials for a primary and secondary
RADIUS server.
RADIUS Server Address
Enter the IP address of the primary and secondary server acting as the RADIUS
user authentication data source.
RADIUS Port
Enter the TCP/IP port number for the primary and secondary server acting as the
RADIUS user authentication data source. The default port is 1812.
RADIUS Shared Secret
Provide a shared secret (password) for user credential authentication with the
primary or secondary RADIUS server.
Server Timeout
Enter a value (between 1 and 300 seconds) to indicate the number of elapsed
seconds causing the switch to time out on a request to the primary or secondary
server.
Server Retries
Enter a value between 1 and 100 to indicate the number of times the switch
attempts to reach the primary or secondary RADIUS server before giving up.